• <button id="rrgjj"></button>

    <button id="rrgjj"><tr id="rrgjj"><kbd id="rrgjj"></kbd></tr></button>
    <em id="rrgjj"><acronym id="rrgjj"><input id="rrgjj"></input></acronym></em>

    應用

    技術

    物聯網世界 >> 商機 >> 物聯網商機
    企業注冊個人注冊登錄

    阻燃型防火魔術貼生產廠家

    發布企業:深圳市瑞鴻富科技有限公司

    聯系電話:0755-89752695
    聯系地址:廣東-深圳市-龍崗區,龍崗街道南聯社區水口村

    在線客服
    點擊這里給我發消息

    ShenZhen Rui Hongfu Technology Co., Ltd http://www.szrhfkj.com
    深圳市瑞鴻富科技有限公司是集于研發生產尼龍粘扣帶魔術貼、射出勾魔術貼、蘑菇頭魔術貼、細軟勾魔術貼、勾毛同體魔術貼、不抓毛魔術貼、發卷帶魔術貼、高周波電壓魔術貼、阻燃型防火魔術貼、背靠背粘扣帶,魔術貼捆綁帶,魔術貼扎帶、背膠沖型魔術貼、松緊彈力魔術貼、、3M魔術貼、魔術布/OK布、注塑袖口魔術貼、3D VR眼鏡頭帶、運動器材魔術貼、醫用魔術貼、數據線收納皮扣、研磨片魔術貼、特殊魔術貼等產品為粘扣扎帶提供最好的解決方案定制加工的大型廠家之一
    魔術貼制造過程首先是織機將原料尼龍紗經織帶機造成胚帶形狀,在經高溫染色設備將半成品的胚帶染成各種顏色.粘扣帶的絨面胚帶是先染顏色在 經起毛機設備將顏色胚帶絨面表面刷起卷毛后再經上漿定型,粘扣帶的鉤面是將染好的胚帶鉤面上漿定型后再將胚帶表面的的尼龍單絲經進口切鉤機給予均勻適當的切斷單絲便形成帶有鉤黏性胚帶,最后再經進口分條經卷設備給予分條成所需的各種規格寬度.再切斷所需長度后并卷裝箱.
    魔術貼制造過程首先是織機將原料尼龍紗經織帶機造成胚帶形狀,在經高溫染色設備將半成品的胚帶染成各種顏色.粘扣帶的絨面胚帶是先染顏色在 經起毛機設備將顏色胚帶絨面表面刷起卷毛后再經上漿定型,粘扣帶的鉤面是將染好的胚帶鉤面上漿定型后再將胚帶表面的的尼龍單絲經進口切鉤機給予均勻適當的切斷單絲便形成帶有鉤黏性胚帶,最后再經進口分條經卷設備給予分條成所需的各種規格寬度.再切斷所需長度后并卷裝箱.
    行業術語稱子母扣。是箱包服飾上常用的一種連接輔料。它分公母兩面:一面是細軟的纖維,另一面是帶有勾刺的彈性纖維。公母相扣,在受到一定橫力的情況下,富有彈性的勾被拉直,從絨圈上松掉而打開,然后又恢復原有的勾型,如此反復開合可達一萬次之多。
    應用行業
    產品廣泛用于服裝、鞋子、帽子、手套、皮包、沙發、車船、座墊、航空用品、雨披、窗簾、玩具、睡袋、體育運動器材、音響器材、醫療器械、帳篷、小輪車護套、各類軍工產品、電子電線、充電器、陳列用具等LENOVO、HP MOTOROLA、SAMSUNG、SONY ERICSSON、SIEMENS、LG等相關業務廠商,長期以來并一直與其保持良好穩定的合作關系. 。
    中文名
    魔術貼
    外文名
    Hook & Loop
    又名
    粘扣帶
    Shenzhen Ruihongfu Technology Co., Ltd. is a research and development production of nylon Velcro strap Velcro, shot hook velcro, mushroom head Velcro, soft hook velcro, hook hair velcro, no hair velcro, hair band Velcro, high frequency voltage Velcro, flame retardant fire velcro, back to back hook with Velcro strap with Velcro strap, back rubber punch Velcro, elastic stretch Velcro, 3M Velcro, Magic Cloth / OK cloth , injection cuff velcro, 3D VR glasses headband, sports equipment velcro, medical velcro, data cable storage buckle, abrasive velcro, special velcro and other products to provide the best solution for the adhesive tie ties custom processing One of the large manufacturers
    The velcro manufacturing process firstly uses the looms to make the raw nylon yarns into the shape of the embryo belt through the ribbon machine, and dyes the semi-finished embryo belts into various colors in the high-temperature dyeing equipment. The suede-embroids of the hook-and-loop belt are dyed in the first color. The equipment of the raising machine will brush the surface of the color embryo with the surface of the suede and then set it by sizing. The hook surface of the hook and loop fastener is used to shape the surface of the dyed embryo with the hook surface and then import the nylon monofilament on the surface of the embryo belt. The hooking machine gives a uniform and appropriate cutting monofilament to form a hook-adhesive embryo belt, and finally, the strips are fed into the strips by the inlet slits to obtain the required widths of various specifications. The length is then cut and packaged. box.
    Industry terminology is called the mother button. It is a kind of connecting accessory commonly used in luggage clothing. It is divided into two sides of the male and female: one side is a soft fiber, and the other side is an elastic fiber with a hook. The male and female are interlocked. When a certain horizontal force is applied, the elastic hook is straightened, loosened from the loop and opened, and then the original hook type is restored, so that the repeated opening and closing can reach 10,000 times. .
    Application industry
    Products are widely used in clothing, shoes, hats, gloves, leather bags, sofas, vehicles and boats, seat cushions, aviation supplies, ponchos, curtains, toys, sleeping bags, sports equipment, audio equipment, medical equipment, tents, BMX jackets, All kinds of military products, electronic wires, chargers, display equipment and other related business companies such as LENOVO, HP MOTOROLA, SAMSUNG, SONY ERICSSON, SIEMENS, LG, etc., have long maintained a good and stable cooperative relationship with them.
    Chinese name
    Velcro
    Foreign name
    Hook & Loop
    Also known as
    Velcro tape

    防火阻燃粘扣帶制造商
    防火魔術貼產品特點:
    防火阻燃材料的耐燃性通常以其氧指數來劃分。氧指數在~的為難燃材料,高于為高難燃材料。二者統稱防火阻燃材料。防火阻燃材料是一種保護材料,它是能夠阻止燃燒而自己并不容易燃燒的材料,它能保證在起火的時候不被燒著,也不會使得燃燒范圍加劇、擴大?,F在紡織行業中有一款防火阻燃魔術貼,是一款很好的防火阻燃材料??梢粤私庀?。
      防火魔術貼產品特性與用途
      依據美國要求標準生產(試樣燃燒融化的平均長度不超過英寸火源移開后燃燒時間平均不超過秒,試樣上掉落物掉下后燃燒時間平均不超過秒。試樣燃燒的平均長度不能超過英寸,在火源移開后燃燒的平均時間不能超過秒,試樣上掉落物掉下后燃燒時間平均不超過秒。
      防火阻燃魔術貼適用于航天航空、專業防火器材和服飾等行業和用途,如飛行器、電源箱、工作服、實驗室、夾克、焊接工作服等等。
    Fire retardant Velcro tape manufacturer
    Fireproof Velcro Features:
    The flame resistance of fire retardant materials is usually divided by their oxygen index. The oxygen index is in flame retardant material, higher than that of high flame retardant material. The two are collectively referred to as fire retardant materials. The fire retardant material is a kind of protective material. It is a material that can prevent combustion and is not easy to burn by itself. It can ensure that it will not be burned when it is on fire, and will not increase or expand the combustion range. Now there is a fire retardant Velcro in the textile industry, which is a good fire retardant material. Can understand.
    Fire velcro product features and uses
    Produced according to the requirements of the United States (the average length of the sample burning and melting does not exceed inches. The burning time after the fire source is removed is not more than two seconds, and the burning time after falling off the sample is not more than seconds. The average length of the sample burning Can not exceed inches, the average time of burning after the fire source is removed can not exceed seconds, and the burning time on the sample falls after the falling time does not exceed seconds.
    Fire-retardant velcro is suitable for aerospace, professional fire equipment and apparel industries, such as aircraft, power boxes, overalls, laboratories, jackets, welding overalls and so on.

    企業其他商機

    更多>>

    相關產品

    更多>>
    支付宝提现捕鱼